Recently, the Russian President hosted a meeting with oil and gas industry representatives. He said that the refusal of some Western countries to cooperate normally with Russia and deny some Russian energy resources has hit millions of European people deeply and caused an energy crisis. These "unfriendly countries" are experiencing severe inflation, and Russia is also facing the three major challenges of increasing domestic consumption of energy nickel alloy are still very uncertain.
New military materials are widely used in aviation, aerospace, weapons, ships, and other fields.
As the lightest engineering metal material, magnesium alloy has a series of unique properties such as light specific gravity, high specific strength and stiffness, good damping and thermal conductivity, strong electromagnetic shielding ability, and good vibration damping, which greatly meet the needs of aerospace, modern weapons and equipment, and other military fields.
Magnesium alloy has many applications in military equipment, such as tank seat frames, vehicle length mirrors, gun length mirrors, gearbox boxes, engine filter seats, inlet, and outlet water pipes, air distributor seats, oil pump housing, water pump housing, oil heat exchanger, oil filter housing, valve chamber cover, breathing apparatus, and other vehicle parts; Tactical air defense missile support cabin and aileron skin, wall, strengthening frame, rudder plate, frame, and other missile and arrow parts; Fighters, bombers, helicopters, transport planes, airborne radar, ground-to-air missiles, carrier rockets, satellites, and other spacecraft aircraft components. Magnesium alloy has the characteristics of lightweight, good specific strength and stiffness, good vibration damping performance, electromagnetic interference, and strong shielding ability, which can meet the requirements of military products for weight reduction, noise absorption, shock absorption, and radiation protection. It occupies a very important position in aerospace and national defense construction and is the key structural material of aircraft, satellites, missiles, fighter and combat vehicles, and other weapons and equipment.
Aluminum alloy has always been one of the most widely used metal structure materials in the military industry. Aluminum alloy material has the characteristics of low density, high strength, and good processing performance, as a structural material, because of its excellent processing performance, can be made into various sections of the profile, pipe, high reinforcement plate, etc., to give full play to the potential of the material, improve the stiffness and strength of the component. Therefore, aluminum alloy is the first choice of lightweight structural material for weapon lighting.
The development trend of aluminum alloy is to pursue high purity, high strength, high toughness, and high-temperature resistance. The aluminum alloy used in the military industry mainly includes aluminum-lithium alloy, aluminum-copper alloy, and aluminum zinc magnesium alloy. The new aluminum-lithium table gold applied in the aviation industry is expected to reduce the weight of aircraft by 8%~15%. Aluminum-lithium alloys are also candidate structural materials for space vehicles and thin-walled missile shells. With the rapid development of the aerospace industry, the research focus of al-li alloy is still to solve the problem of poor toughness and cost reduction in a thickness direction.
The commonly used structural ceramic materials mainly include aluminum oxide, lead oxide, silicon nitride, silicon carbide, aluminum nitride, and its composite materials. Structural ceramics are widely used in the field of national defense and military industry because of their high strength, high hardness, high-temperature resistance, corrosion resistance, and wear resistance.
Ceramic materials are the fastest developing high-tech materials in the world today. It has developed from single-phase ceramics to multi-phase composite ceramics. Structural ceramics have a good application prospect in the military industry because of their excellent properties such as high-temperature resistance, low density, wear resistance, and low thermal expansion coefficient. The high hardness and wear resistance of structural ceramics can be used to prepare ceramic cutting tools, ceramic bearings, bulletproof armor, various valves, wear-resistant linings, sealing rings; High-temperature ceramic heat exchangers, automobile exhaust filters, and gas turbine high-temperature overcurrent components can be prepared by using the high-temperature resistance of structural ceramics. The transparency of structural ceramics can be used to prepare transparent lamp tubes and missile window materials.
Ultra-high strength steel
For ultra-high-strength steel the yield strength and tensile strength is more than 1200MPa and 1400MPa steel, it is to meet the requirements of aircraft structure of high specific strength materials and research and development. Ultra-high strength steel not only has high tensile strength but also has certain plasticity and toughness, small notch sensitivity, high fatigue strength, certain corrosion resistance, good process performance, in line with resources and low price, etc., so it is more and more widely used in the aviation industry. Ultra-high strength steel is used to make rocket engine casings, aircraft fuselage skeletons, skin and landing parts, as well as high-pressure vessels and some conventional weapons. The use of steel in aircraft has decreased due to the expansion of titanium alloys and composite materials, but the key load-bearing components in aircraft are still made of ultra-high-strength steel. At present, the international representative of the low alloy ultra-high-strength steel 300M, is a typical aircraft landing gear steel. In addition, low alloy ultra-high-strength steel D6AC is a typical solid rocket engine housing material. The development trend of ultra-high-strength steel is to improve toughness and corrosion resistance while ensuring ultra-high strength.
Superalloy in 600~1200℃ high temperature can withstand certain stress and has oxidation resistance or corrosion resistance of alloy, with high-temperature strength, good oxidation resistance and corrosion resistance, good fatigue performance, fracture toughness, and other comprehensive properties are widely used in aviation, aerospace, petroleum, chemical industry, ship an important material.
According to the matrix elements, superalloys are divided into iron base, nickel base, cobalt-base, and other superalloys. The use temperature of iron base superalloy can only reach 750~780℃ in general, for heat resistant parts used at higher temperatures, the use of nickel base and refractory metal-based alloy. Nickel-based superalloys play a very important role in the whole field of superalloys. They are widely used to manufacture the hottest parts of aviation jet engines and various industrial gas turbines. If the 150MPA~100H durable strength as the standard and the current nickel alloy can withstand the highest temperature of more than 1100℃, and nickel alloy is about 950℃, iron-based alloy less than 850℃, that is, nickel-based alloy correspondingly higher than 150℃ to 250℃ or so. So, they call nickel alloy the heart of the engine. At present, in advanced engines, nickel alloy has accounted for half of the total weight, not only turbine blades and combustion chambers, but also turbine disks, and even the last several compressor blades began to use nickel alloy. Compared with iron alloy, the advantages of nickel alloy are higher working temperature, stable structure, less harmful phase, and oxidation resistance to corrosion. Compared with cobalt alloy, nickel alloy can work at higher temperatures and under stress, especially in moving blades.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality materials at very good prices, please feel free to contact us and send an inquiry. ([email protected])
China's non-manufacturing purchasing managers index for March was released by the China Federation of Logistics and Purchasing and the Service Industry Survey Center of the National Bureau of Statistics today. An index of business activity for the non-manufacturing sector as a whole fell below 50 percent.
China's non-manufacturing business activity index was 48.4%, down 3.2 percentage points from the previous month. The new orders index was 45.7 percent, down 1.9 percentage points from the previous month, indicating a significant slowdown in the growth of supply and demand in the non-manufacturing sector from the previous month. In terms of sectors, the business activity index and new order index of transportation, accommodation and catering, culture, sports and entertainment, and tourism-related industries all declined significantly from the previous month.
Then the nickel alloy of the market may be affected by significant changes, the price will also be volatile, if you want to know the latest news of the nickel alloy, welcome to contact us.
Boron carbide, also known as black diamond, is an inorganic substance with the chemical formula B4C. Hard black lustrous crystal.…
Natural graphite is naturally occurring graphite. Natural graphite is an important industrial mineral with applications in almost every aspect of manufacturing, including electronics, atomic energy, hot metal working, friction, coatings, aerospace, p…
Vein graphite is known by various names including crystalline vein, Plumbago, Sri Lankan graphite and Ceylon graphite…