Products

  • 0
  • 0

High Purity 3D Printing Nickel Alloy IN718 Powder

As the European Union tries to reduce its dependence on Russian energy, the Russian president recently said Russia would try to shift its energy exports to the east, adding that there was no way for European countries to give up Russian gas immediately.

Russia supplies about 40 percent of the EU's gas, and western sanctions imposed over the conflict with Ukraine have complicated financing and logistical arrangements for existing agreements, hitting Russian energy exports, the report noted.  

Russia has been building closer ties with China and other Asian countries as the European Union debates whether to impose sanctions on Russian gas and oil and member states seek supplies from elsewhere, Reuters said.  

"So-called partners from unfriendly countries admit that they cannot survive without Russian energy, including gas," the Russian president said in a televised government meeting. There is no reasonable alternative to Russian gas in Europe right now."  

He also said Europe was driving up energy prices and destabilizing markets by talking about cutting off Russia's energy supplies. Russia, which produces about a tenth of the world's oil and a fifth of its natural gas, will need new infrastructure to increase energy supplies to Asia, he said.

He ordered Moscow to submit a plan by June 1, including "the expansion of transport infrastructure to countries in Africa, Latin America, and the Asia-Pacific region".  

He also sought to clarify the possibility of integrating two pipelines -- the Sakhalin-Khabarovsk-Vladivostok gas pipeline in the Far East and the "Power of Siberia" gas pipeline to China -- into Russia's unified gas supply system. In theory, connecting these routes to larger gas networks could allow Russia to divert gas from Europe to Asia.

Because of the ever-changing international situation, the supply and prices of international bulk In718 powder are still very uncertain.

About 3D Printing Nickel Alloy IN718 Powder:
Nickel Alloy IN718 is heat and corrosion-resistant nickel alloy powder.
 
This kind of precipitation-hardening nickel-chromium alloy is characterized by having good tensile, fatigue, creep and rupture strength at temperatures up to 700 °C (1290 °F).
Nickel Alloy INCONEL alloy 718 is a high-strength, corrosion-resistant nickel-chromium material used at -423° to 1300°F. The age-hardenable alloy can be readily fabricated, even into complex parts. Its welding characteristics, especially its resistance to post-weld cracking, are outstanding.
 
Inconel 718 is a nickel-based superalloy, which is very suitable for applications requiring high strength in the temperature range from low temperatures to 1400°F. Inconel 718 also has excellent tensile strength and impact strength. Inconel 718 has good oxidation and corrosion resistance at temperatures within the useful strength range of the alloy in the atmosphere encountered in the operation of jet engines and gas turbines.
 
Inconel718 alloy is a precipitation hardening nickel-chromium-iron alloy containing niobium and molybdenum. It has high strength, good toughness and corrosion resistance in high and low-temperature environments below 650°C. Its state can be solid solution treatment or precipitation hardening state.
Inconel718 alloy has excellent characteristics and easy processing; it has high tensile strength, fatigue strength, creeps strength and breaking strength at 700℃; high oxidation resistance at 1000℃; stable chemistry at low temperatures performance; Good welding performance. Feel free to send an inquiry to get the latest price if you would like to buy 3D Printing Nickel Alloy IN718 Powder in bulk

 

Composition of IN718 nickel alloy powder

 

Ni

Cr

Nb

Mo

Ti

Al

Cu

Fe

50.0-55.0

17.0-21.0

4.75-5.25

2.80-3.30

0.65-1.15

0.20-0.80

≤0.30

bal

 

category

Alloy grades and characteristics

Alloy number:

IN718 nickel alloy powder

Particle size:

15-45μm, 15-53μm, 53-120μm, 53-150μm

Morphology:

Spherical or nearly spherical

Appearance:

Grey

Package:

Aluminum bag, Vacuum packing

Application:

3D Printing Nickel Alloy powder

Other applications:

powder metallurgy(PM), injection molding(MIM), spray painting(SP) etc.



How is 3D Printing Nickel Alloy IN718 Powder produced?
Inconel718 alloy is a difficult-to-process material in the field of mechanical processing. It needs to go through a series of steps.
Warm-up
The surface of the workpiece must be cleaned before and during the healing process to keep the surface clean. If the heating environment contains sulfur, phosphorus, lead or other low melting point metals, Inconel718 alloy will become brittle. Impurities come from marking paint, chalk, lubricating oil, water, fuel, etc. The sulfur content of fuel should below. For example, the impurity content of liquefied gas and natural gas should be less than 0.1%, the sulfur content of city gas should be less than 0.25g/m3, and the sulfur content of petroleum gas should be less than 0.5%.
The heated electric furnace should have a more accurate temperature control ability, the furnace gas must be neutral or weakly alkaline, and the composition of the furnace gas should be prevented from fluctuating in oxidation and reducibility.
Thermal processing
The suitable hot working temperature of Inconel718 alloy is 1120-900℃, and the cooling method can be water quenching or other rapid cooling methods. After hot working, it should be annealed in time to ensure the best performance. The material should be heated to the upper limit of the processing temperature during hot processing. In order to ensure the plasticity during processing, the final processing temperature when the deformation reaches 20% should not be lower than 960°C.
Cold working
Cold working should be carried out after solution treatment. The work hardening rate of Inconel718 is greater than that of austenitic stainless steel, so the processing equipment should be adjusted accordingly, and there should be an intermediate annealing process during the cold working process.
Heat treatment
Different solution treatment and aging treatment processes will result in different material properties. Due to the low diffusion rate of γ" phase, Inconel718 alloy can obtain the best mechanical properties through long-term aging treatment.
Polished
The oxide near the weld of the Inconel718 workpiece is more difficult to remove than stainless steel. It needs to be polished with a fine sanding belt. Before pickling in a mixed acid of nitric acid and hydrofluoric acid, the oxide should be removed with sandpaper or a salt bath is required. deal with.
Machining
The machining of Inconel718 needs to be carried out after solution treatment, and the work hardening of the material should be considered. Unlike austenitic stainless steel, Inconel718 is suitable for low surface cutting speeds.
Welding
The precipitation-hardening type Inconel718 alloy is very suitable for welding and has no tendency to crack after welding. Weldability, ease of processing, and high strength are the major advantages of this material.
Inconel718 is suitable for arc welding, plasma welding, etc. Before welding, the surface of the material should be clean, free of oil, powder, etc., and the bright metal should be polished within 25mm of the weld.
 
Applications of 3D Printing Nickel Alloy IN718 Powder:
Inconel In718 is our original material for 3D printing and additive manufacturing in this nickel alloy.
 
In718 has good tensile strength, fatigue resistance and fracture resistance. It has creep resistance at high temperatures up to 700°C. It is easy to weld and has excellent corrosion resistance. In addition, Inconel In718 can be heat treated.
 
Due to its comprehensive properties, Inconel 718 can be widely used in various applications, such as liquid fuel rockets, rings and casings, various formed sheet metal parts for aircraft and land-based gas turbine engines, cryogenic storage tanks, and fastening Parts and instrument parts.
 
In718 has excellent heat resistance, so it is very suitable for high-temperature applications, including gas turbine and aerospace applications. Other applications include pumps and measuring probes in energy and process technology.

Storage Condition of IN718 Powder:
Damp reunion will affect IN718 powder dispersion performance and using effects, therefore, IN718 powder should be sealed in vacuum packing and stored in cool and dry room, the IN718 powder can not be exposure to air. In addition, the IN718 powder should be avoided under stress.

Packing & Shipping of IN718 Powder:
We have many different kinds of packing which depend on the IN718 powder quantity.
IN718 powder packing:vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
IN718 powder shipping: could be shipped out by sea, by air, by express, as soon as possible once payment receipt.


Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for high-quality In718 powder, please feel free to contact us and send an inquiry. ([email protected])
 

Nickel Alloy IN718 Powder Properties

Other Names IN718, Inconel-718 powder, Inconel 718 Powder
CAS No. N/A
Compound Formula Ni/Fe/Cr
Molecular Weight N/A
Appearance Gray to black powder
Melting Point 1370-1430 °C
Solubility in water N/A
Density 8.192 g/cm3
Purity N/A
Particle Size 15-45μm, 15-53μm, 53-120μm, 53-150μm
Boling point N/A
Specific Heat N/A
Thermal Conductivity 6.5 W/m·K
Thermal Expansion N/A
Young's Modulus N/A
Exact Mass N/A
Monoisotopic Mass N/A
   
   

Nickel Alloy IN718 Powder Health & Safety Information

Safety Warning Danger
Hazard Statements H317-H351-H372
Flashing point N/A
Hazard Codes Xn
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information  NONH for all modes of transport
WGK Germany N/A

Cancer cells can "stretch out a big hand" and take away the mitochondria of immune cells. The Harvard Medical School research team cultured mouse and human breast cancer cells and immune cells, such as killer T cells, and used field emission scanning electron microscopy (FESEM) to observe the relationship between cancer cells and immune cells. interactive. Interestingly, they found that cancer cells stick out long nanotubes, typically within 100-1000 nanometers in diameter, each of which connects to multiple immune cells along the way. The researchers used the drug L-778123, which inhibits the formation of nanotubes, for treatment. The higher the concentration of L-778123, the better the treatment effect.

It is used in various high-tech fields, so the market demand for In718 powder will continue to rise. We are a quality supplier of In718 powder, please feel free to contact us.

Inquiry us

Our Latest Products

What is Zinc Sulfide ZnS Product?

Zinc sulfide ZnS is an inorganic compound, which is a white or light yellow powder with excellent fluorescence effect and electroluminescence function, especially nano-zinc sulfide has a unique photoelectric effect, which is used in electricity, magn…

How is lithium 12-hydroxystearate produced?

Lithium 12-hydroxystearate is widely used in lubricants, stabilizers, bleaching agents, thickeners. Product Name:Lithium 12-Hydroxystearate…

What is the scope of application of boron nitride?

Boron nitride is a crystal composed of nitrogen atoms and boron atoms.The chemical composition is43.6%boron and56.4%nitrogen,with four different variants:hexagonal boron nitride,rhombohedral boron nitride,cubic nitride Boron,and wurtzite boron nitrid…